
CAT: BFP/VCAR
VAMS04
P
T
0.4
0.2-0.5 bar
patent pending
IE/VAMS04/001/2011 SHEET: 1/1
VAM S 04 04 00 1
11
Q (l/min)
P(bar)
0
1
2
3
4
5
0
24
6810
12
1/4 BSP
Ø 5.5
12.5
69
9.5
11
P
27
T
Ø 34.5
Ø 22
SOFT START VALVE - IN-LINE MOUNTING
HYDRAULIC SYMBOL
PRESSURE DROPS
Fluid used: mineral based oil with viscosity 32 mm²/s at 40°C.
VAM = Soft start valve
ORDERING CODE
Series
Version
Closing speed
S = Soft start
04 = Ø 0,4 mm (orifice)
1 = Serial No.
00 = No variants
Size
04 = 1/4 BSP
HYDRAULIC FEATURES
Max. working pressure
210 bar
Max. Flow 8 l/min
Rump up time (at 100 bar of working
pressure)
600 ms
Max. Leakage at 100 bar 0.8 l/min
Operating frequency 0.7 Hz
Working Temperature -25°C ÷ 60°C
Hydraulic fluid
DIN 51524 Mineral oils
Fluid viscosity 10 ÷ 500 mm
2
/s
Fluid temperature -25°C ÷ 75°C
Max. contamin. level class with filter ISO 4406:1999 - class 19/17/14
Weight 0.4 kg
Tightening torque
25 ÷ 30 Nm
SOFT START VALVES
Variants
Valve used on power units to generat a flow rate ramp on the actuator to
delay system pressurisation and allow the single phase motor to reach the
required speed.
Fitted directly on the auxiliary pressure delivery line of unit 1 pumps or on the
delivery branch between pump and unidirectional valve.
The body is in steel and the tapered poppet in tempered and ground steel.
Page: 93
HOME INFO VALVES INDEX